www.supertalent.com The Official Super Talent Support Forum

Login
FAQ MembersRegister

DURA Drive ET2 pin 20 problem

New and perfect for legacy product performance inclease and military Appl.

Postby MrJones » Tue Feb 12, 2013 10:14 pm

No, the drive is not detected at BIOS without jumper (also not with any jumper).

So far i was setting the jumper always uppright (because i coudn't find a sketch how to set it). You mean i should place it at the bottom, do you mean hotizontal?

Last four Pins without jumper: :::::::::.:::::::::: ::
Setting i tried first: :::::::::.:::::::::: |:
Setting i tried second: :::::::::.:::::::::: :|
Setting you mention: :::::::::.:::::::::: _ (can't get the two top pins above the line :-)

Is this correct?

Yes, i still have all paper stuff of the Notebook.

I am trying to install Win7-32 bit (like on the KingSpec SSD).
MrJones
 
Posts: 8
Joined: Tue Jan 22, 2013 9:13 am

Postby SSD-James » Wed Feb 13, 2013 10:18 am

I do not know why your PC could not detect the drive at BIOS.
If it does not detect it at BIOS, no matter what you do with jumper positioning, it is worthless.
Please let me know of your drive serial number to see if it has the latest firmware.
The serial number should start xxxxxxxx-XXXX-xxxxxxxxx
Please let me know.
SSD-James
 
Posts: 2076
Joined: Fri Jul 16, 2010 12:41 pm

Postby MrJones » Thu Feb 14, 2013 10:24 am

Hi James,

thank you for having a lot of patience.

The serial number is: S115001-NOC1-117D026
MrJones
 
Posts: 8
Joined: Tue Jan 22, 2013 9:13 am

Postby SSD-James » Thu Feb 14, 2013 10:52 am

I had delivered your situation to my engineer.
Sent an e-mail.
SSD-James
 
Posts: 2076
Joined: Fri Jul 16, 2010 12:41 pm

Postby MrJones » Mon Feb 25, 2013 12:43 am

Hello James,

any news from your engineer?

Tomorrow i have to send the SSD back to my dealer. So if you have any new solution please let me know...
MrJones
 
Posts: 8
Joined: Tue Jan 22, 2013 9:13 am

Postby SSD-James » Tue Feb 26, 2013 10:46 am

The engineer left the company.
Please RMA it.
SSD-James
 
Posts: 2076
Joined: Fri Jul 16, 2010 12:41 pm

Previous

Return to DURA Drive AT2/3, ET2, ZT2

Who is online

Users browsing this forum: No registered users and 2 guests

cron