www.supertalent.com The Official Super Talent Support Forum

Login
FAQ MembersRegister

Firmware update to 2142 for ST28A6X25H

The latest and final firmware for Ultra Drive GX/GX2 series.

Postby RisingEdge » Wed Oct 17, 2012 10:18 am

I do not have a camera handy but...

SAMSUNG 931
K9WBG08U1M
PCK0
FMG050X2

is on the chips.

Using K9WBG08U1M MPT indicates success. I will test and report results.
RisingEdge
 
Posts: 7
Joined: Fri Oct 12, 2012 11:40 am

Postby RisingEdge » Wed Oct 17, 2012 1:32 pm

Both drives successfully updated.
Trim appears to work.
If we trim the whole drive (or part) the data is still readable until we power cycle the drive.
This is frequently the case for the two 256GB I updated Monday although sometimes reads return zeros without cycling power.
Have you seen this before?
RisingEdge
 
Posts: 7
Joined: Fri Oct 12, 2012 11:40 am

Postby SSD-James » Thu Oct 18, 2012 7:34 am

Good to hear you finally found the right selections.
I haven't checked the trimmed data.
I have checked the performance before and after the TRIM.
If the trim command works right, you should not get the data.
TRIM means "Erase the data by block" in terms of NAND flash chip.
SSD-James
 
Posts: 2076
Joined: Fri Jul 16, 2010 12:41 pm

Previous

Return to Latest Firmware MP TOOL Download

Who is online

Users browsing this forum: No registered users and 1 guest

cron