www.supertalent.com The Official Super Talent Support Forum

Login
FAQ MembersRegister

Require permission to flash firmware for FTM28GX25H

The latest and final firmware for Ultra Drive GX/GX2 series.

Postby de1987 » Mon Dec 31, 2012 2:20 am

James,

updated! no more BSODs, thanks
works perfectly
happy new year
de1987
 
Posts: 5
Joined: Fri Dec 28, 2012 10:52 am

Postby SSD-James » Mon Dec 31, 2012 8:51 am

Happy new year to you too.
Thanks,
James
SSD-James
 
Posts: 2076
Joined: Fri Jul 16, 2010 12:41 pm

Postby wellsplattered » Wed Mar 20, 2013 3:02 pm

Model number: FTM28GX25H, firmware 1819
Serial number: R517750-DDIX-6169001
Board : ASUS GENE II - Intel

Thanks
wellsplattered
 
Posts: 3
Joined: Wed Mar 20, 2013 2:59 pm

Postby SSD-James » Wed Mar 20, 2013 3:14 pm

Model number: FTM28GX25H, firmware 1819
Serial number: R517750-DDIX-6169001
Board : ASUS GENE II - Intel
Your SSD flash selection is K9HCG08U1M 128GB.
SSD-James
 
Posts: 2076
Joined: Fri Jul 16, 2010 12:41 pm

Postby wellsplattered » Wed Mar 20, 2013 3:27 pm

SSD-James wrote:Model number: FTM28GX25H, firmware 1819
Serial number: R517750-DDIX-6169001
Board : ASUS GENE II - Intel
Your SSD flash selection is K9HCG08U1M 128GB.


Many thanks. I have checked the drive and no external switch. I need to find some torque tools.
wellsplattered
 
Posts: 3
Joined: Wed Mar 20, 2013 2:59 pm

Postby SSD-James » Wed Mar 20, 2013 4:10 pm

Yes, you may need that.
SSD-James
 
Posts: 2076
Joined: Fri Jul 16, 2010 12:41 pm

Postby wellsplattered » Thu Mar 21, 2013 7:42 am

SSD-James wrote:Model number: FTM28GX25H, firmware 1819
Serial number: R517750-DDIX-6169001
Board : ASUS GENE II - Intel
Your SSD flash selection is K9HCG08U1M 128GB.


Today I obtined some torque tools and removed the 4 torque screws from the cover. I located the two tiny holes in the PCB and shorted them to switch into factory mode. I used a wire to short, with no issues.

The new firmware has totally recovered the drive. I used the existing firmware 1819 for 3 years without issue, but recently notice the slow down in speed. Indeed, running the atto benchmark I could clearly see that the drive had degraded so much that 0.5 to 4kb read/write speeds were under 10mb/sec. Maximum read/write was 90mb/s on the 8192kb test. Even deleting the volume and creating a new partition was hanging disk manager.

The new firmware has recovered the drive to full speed again and I/O's have returned to what I deem normal (200mb/s and 240mb/s) :) It created a new volume easily without issue.

Thank you again. Comparable benchmarks to the new intel drive I just bought (SATA2 limited).
wellsplattered
 
Posts: 3
Joined: Wed Mar 20, 2013 2:59 pm

Postby SSD-James » Thu Mar 21, 2013 9:25 am

Good to hear your happy voice.
SSD-James
 
Posts: 2076
Joined: Fri Jul 16, 2010 12:41 pm

Postby eDGe » Sat May 25, 2013 1:51 am

Hi James,
I have two ST SSD for F/W update 2142:
1. FTM28GX25H; P638047-MIBY-708A038
for this SSD I could not find the right selection code
==> It is MT29F64G08CFABA 128GB

2. STT_FTM28GX25H; P590388-TFBX-A229028
the selection code for this SSD I found out is: TH58NVG6D1DTG20 128GB (is it correct?)
It is correct.
both drives have actually F/W 2030

My System:
CPU: AMD Phenom II x4 955 BE 3.2GHz
OS: Win7 64bit ultimate
Board: Gigabyte GA-MA790FXT-UD5P
North Bridge: AMD 790FX
South Bridge: AMD SB750

Thanks for your assistance
Regards
Achim
eDGe
 
Posts: 12
Joined: Wed Jan 27, 2010 10:59 am

Postby SSD-James » Thu Jun 06, 2013 9:08 am

eDGe, did you get my answer?
SSD-James
 
Posts: 2076
Joined: Fri Jul 16, 2010 12:41 pm

PreviousNext

Return to Latest Firmware MP TOOL Download

Who is online

Users browsing this forum: No registered users and 1 guest