www.supertalent.com The Official Super Talent Support Forum

Login
FAQ MembersRegister

Require permission to flash firmware for FTM64GX25H

The latest and final firmware for Ultra Drive GX/GX2 series.

Postby Priamos » Tue Jun 11, 2013 1:48 pm

Hello,
My SSD: FTM64GX25H
S/N: R575300-AJBX-330B029
FW : 2030
Motherboard: MSI MS-7380
What is the choice?

Best regards
Andreas
Priamos
 
Posts: 4
Joined: Tue Jun 11, 2013 1:36 pm

Postby SSD-James » Thu Jun 13, 2013 2:22 pm

My SSD: FTM64GX25H
S/N: R575300-AJBX-330B029
Selection is K9LBG08U0M 64GB.
SSD-James
 
Posts: 2076
Joined: Fri Jul 16, 2010 12:41 pm

Postby Priamos » Fri Jun 14, 2013 11:20 am

Hello James,
thank you :)
Best regards
Andreas
Priamos
 
Posts: 4
Joined: Tue Jun 11, 2013 1:36 pm

Postby Priamos » Fri Jun 14, 2013 4:16 pm

Mayday,mayday ;)
I tried to flash my SSD with MP-Tool and FW 2142. My selection was K9LBG08U0M. After "Start"-Button i saw a DOS-Box with checking the SD-RAM. After closing the box, MP-Tool reports an error by "Module" and Flash fail.
I麓ve got some XLS-files:

SATA/SDRAM Check,PROGRESS,"SATA Test start.
Drive number = 1
",R575300-AJBX-330B030
SATA/SDRAM Check,PASS,SATA Test finish"",R575300-AJBX-330B030"
NAND Check,PROGRESS,"Module Test start",R575300-AJBX-330B030
NAND Check,FAIL,"ERROR : Invalid flash maker code
Current Maker ID = 0098 Original Maker ID = 00EC
"Bank 00 (A0) - low (Chip U3) : 98 D5 94 32 76 high (Chip U4) : 98 D5 94 32 76"

ERROR : Invalid flash maker code
Current Maker ID = 0098 Original Maker ID = 00EC
"Bank 01 (B0) - low (Chip U7) : 98 D5 94 32 76 high (Chip U8) : 98 D5 94 32 76"

ERROR : Invalid flash maker code
Current Maker ID = 0098 Original Maker ID = 00EC
"Bank 02 (C0) - low (Chip U11) : 98 D5 94 32 76 high (Chip U12) : 98 D5 94 32 76"

ERROR : Invalid flash maker code
Current Maker ID = 0098 Original Maker ID = 00EC
"Bank 03 (D0) - low (Chip U15) : 98 D5 94 32 76 high (Chip U16) : 98 D5 94 32 76"

ERROR : Invalid flash maker code
Current Maker ID = 0098 Original Maker ID = 00EC
"Bank 04 (A1) - low (Chip U5) : 98 D5 94 32 76 high (Chip U6) : 98 D5 94 32 76"

ERROR : Invalid flash maker code
Current Maker ID = 0098 Original Maker ID = 00EC
"Bank 05 (B1) - low (Chip U9) : 98 D5 94 32 76 high (Chip U10) : 98 D5 94 32 76"

ERROR : Invalid flash maker code
Current Maker ID = 0098 Original Maker ID = 00EC
"Bank 06 (C1) - low (Chip U13) : 98 D5 94 32 76 high (Chip U14) : 98 D5 94 32 76"

ERROR : Invalid flash maker code
Current Maker ID = 0098 Original Maker ID = 00EC
"Bank 07 (D1) - low (Chip U17) : 98 D5 94 32 76 high (Chip U18) : 98 D5 94 32 76"

ERROR : Invalid flash maker code
Current Maker ID = 0098 Original Maker ID = 00EC
"Bank 08 (A2) - low (Chip U3) : 98 D5 94 32 76 high (Chip U4) : 98 D5 94 32 76"

ERROR : Invalid flash maker code
Current Maker ID = 0098 Original Maker ID = 00EC
"Bank 09 (B2) - low (Chip U7) : 98 D5 94 32 76 high (Chip U8) : 98 D5 94 32 76"

ERROR : Invalid flash maker code
Current Maker ID = 0098 Original Maker ID = 00EC
"Bank 10 (C2) - low (Chip U11) : 98 D5 94 32 76 high (Chip U12) : 98 D5 94 32 76"

ERROR : Invalid flash maker code
Current Maker ID = 0098 Original Maker ID = 00EC
"Bank 11 (D2) - low (Chip U15) : 98 D5 94 32 76 high (Chip U16) : 98 D5 94 32 76"

ERROR : Invalid flash maker code
Current Maker ID = 0098 Original Maker ID = 00EC
"Bank 12 (A3) - low (Chip U5) : 98 D5 94 32 76 high (Chip U6) : 98 D5 94 32 76"

ERROR : Invalid flash maker code
Current Maker ID = 0098 Original Maker ID = 00EC
"Bank 13 (B3) - low (Chip U9) : 98 D5 94 32 76 high (Chip U10) : 98 D5 94 32 76"

ERROR : Invalid flash maker code
Current Maker ID = 0098 Original Maker ID = 00EC
"Bank 14 (C3) - low (Chip U13) : 98 D5 94 32 76 high (Chip U14) : 98 D5 94 32 76"

ERROR : Invalid flash maker code
Current Maker ID = 0098 Original Maker ID = 00EC
"Bank 15 (D3) - low (Chip U17) : 98 D5 94 32 76 high (Chip U18) : 98 D5 94 32 76"

Bank configuration error (must be 00FF)
Current configuration = 0000
",R575300-AJBX-330B030
Firmware download result,FAIL, ,R575300-AJBX-330B030
"

What happens?
Best regards
Andreas

P.S. Sorry for my bad english. I learned it 30 years ago in the school. ;)
Priamos
 
Posts: 4
Joined: Tue Jun 11, 2013 1:36 pm

Postby SSD-James » Tue Jun 18, 2013 10:40 am

Your Flash selection was wrong.

Please try with the following flash selection:
K9LBG08U0D 64GB
MT29F32G08CBABA 64GB.
Or JS29F32G08AAMDB 64GB
Or TH58NVG5D1DTG20 64GB.

Thanks,
James
SSD-James
 
Posts: 2076
Joined: Fri Jul 16, 2010 12:41 pm

Postby Priamos » Thu Jun 20, 2013 1:45 pm

Hi James,
thank you for help.
Because your suggestions were wrong, i tried every 64GB-entry.
I麓m happy to say, that TH58NVG5D2ETA20 64GB(SDRAM 64MB) was succes.
Have a nice day.
Andreas


That is exactly what I wanted to say.
Try all kinds of 64GB selection... It does not hurt your SSD.

thanks for your feedback in advance,
James
Priamos
 
Posts: 4
Joined: Tue Jun 11, 2013 1:36 pm

Previous

Return to Latest Firmware MP TOOL Download

Who is online

Users browsing this forum: No registered users and 1 guest