Hi,
some time ago my STT ExpressDuo stopped being recognized (not detected by any OS available- OSX, Win etc.) when attached to USB 3.0 ports.
Works fine when plugged into USB 2.0 ports.
Is there a solution to this problem?
STT ExpressDuo 16gb is recognized on USB 2.0 ports only
3 posts
• Page 1 of 1
STT ExpressDuo 16gb is recognized on USB 2.0 ports only
by twotimer123 » Wed Oct 29, 2014 4:35 am
- twotimer123
- Posts: 1
- Joined: Wed Oct 29, 2014 4:29 am
Re: STT ExpressDuo 16gb is recognized on USB 2.0 ports only
by STT_ayang » Tue Nov 04, 2014 4:28 pm
Hello twotimer123,
This is an interesting problem you seem to be having. Are you plugging the drive in directly to USB 3.0 ports or through a hub or extra link?
If not, please submit an RMA request for your product at http://www.supertalent.com/support/rma_online.php with all the required information detailing your problem. Once approved, you should receive further instructions on how to get a working product back into your hands.
This is an interesting problem you seem to be having. Are you plugging the drive in directly to USB 3.0 ports or through a hub or extra link?
If not, please submit an RMA request for your product at http://www.supertalent.com/support/rma_online.php with all the required information detailing your problem. Once approved, you should receive further instructions on how to get a working product back into your hands.
- STT_ayang
- Posts: 39
- Joined: Mon Dec 17, 2012 11:19 am
Re: STT ExpressDuo 16gb is recognized on USB 2.0 ports only
by trbodden » Thu Apr 07, 2016 6:43 am
I have had similar problem. Make sure the usb connection to the computer is in far enough to make ground connection
- trbodden
- Posts: 5
- Joined: Tue Jun 07, 2011 9:37 am
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest