Page 1 of 1

Killed my SSD?

PostPosted: Mon Apr 01, 2013 9:34 am
by pillepalle

i tried Iso-Updater on my FTM28GX25H, cause MP-Tool is not possible in my SSD-only PC.

It says it flashed to firmware 2142, told me to restart etc.
Now with switch in user mode, my drive isn't recognised anymore, in factory mode it is impossible to install win8 again.

Also Iso-Updater does not find my drive anymore, no matter what position the switch is in.

Is there any possibility to resurrect my ssd?

SN: P588696-DTBX-9299046


PostPosted: Tue Apr 02, 2013 1:17 am
by pillepalle

i used my neighbours computer to fix it with mp-tool.

but there should be a clear warning somewhere not to use this iso-updater! or even better: an improved, working iso-updater.

PostPosted: Tue Apr 02, 2013 9:55 am
by SSD-James
Sorry about it.
I hope you successfuly updated the fw with MP tool.

PostPosted: Wed Apr 03, 2013 5:33 am
by pillepalle
yes, it's working again, thanks.

PostPosted: Thu Apr 04, 2013 10:14 am
by SSD-James
Thanks for your confirmed feedback.