Page 1 of 1

Flash select for FTM56GX25H, and request allowance to ope

PostPosted: Fri Apr 13, 2012 3:11 am
by Valerian
Dear Sir,

I need the Flash selection for my


Printed on the SSD is


Probably I also have to open with a screwdriver, as in your Instructions, to get to the "Factory-Settings"-Switch. Is that correct? In case, do You allow that?

Thank You!


Ansgar Heynen

PostPosted: Fri Apr 13, 2012 7:24 am
by SSD-James
FTM56GX25H. R573148-AJBX-303B001
Per your information, it is K9HCG08U1M 256GB.
You may not need to open the casing.
It seems like your SSD has external switch.
But if it does not have it, you are allowed to open the case.


PostPosted: Sat Apr 21, 2012 7:54 am
by Valerian
You are right, I did not check my mail before sending, causing a typo:

My ssd-type is

FTM28GX25H (128 GB)

Number is


It does not have any external switch.

Can you re-check, please?


Ansgar Heynen

PostPosted: Mon Apr 23, 2012 12:39 pm
by SSD-James
FTM28GX25H (128 GB) R573148-AJBX-303B001
Your drive Flash selection is K9HCG08U1M 128GB.
You are allowed to open the case to update the firmware.

PostPosted: Tue Jan 08, 2013 9:46 am
by ssd-fan
I would like to make the firmware upgrade to my FTM56GX25H with SN R581147-ALBX-709B006. Therefore, I ask findly for the permission to open the case.
Furthermore, I need the right Flash selection.

Thanks. ;)

PostPosted: Mon Jan 14, 2013 4:07 pm
by SSD-James
FTM56GX25H with SN R581147-ALBX-709B006
Yes, you now have permission.
The flash selection of your SSD is K9HCG08U1M 256GB.