www.supertalent.com The Official Super Talent Support Forum

FAQ MembersRegister

Firmware V1916 released 0106

All firmware upgrade issues should go here

Re: Firmware V1916 released 0106

Postby dd76 » Thu Feb 25, 2010 6:32 pm

i still run 1571 have had no issues with the 128gb ultra drive ever its always fast im a graphic artist and i use and delete many things daily i have purchased 6 128gb ssd'd for every pc in my house never have had an issue with anything just changed to the new 790FXTAUD5 and performance has increased Major in raid 0 10G 6gbps AMD users this board is Awesome had the UD5P before now i know nothing about these scores but i feel the speed no matter what this atto diskbenchmark says

Posts: 3
Joined: Thu Feb 25, 2010 6:17 pm

Re: Firmware V1916 released 0106

Postby dd76 » Thu Feb 25, 2010 6:37 pm

also sorry for the double post wanted to note that with this new board scores a 7.4 on windows experience HDD was 7.6 gfx 7.8 memory 7.7 processor 7.4 SUPERTALENT for me rocks and i have also had the other brand ssd's vertex x25 etx even the p128 but supertalent is the one for me sorry to hear so many having issues but i purchased 6 of these with no issues hope you all get it sorted sooner or later
Posts: 3
Joined: Thu Feb 25, 2010 6:17 pm

Re: Firmware V1916 released 0106

Postby skirb » Fri Feb 26, 2010 4:04 am

Last edited by skirb on Mon Mar 08, 2010 2:27 am, edited 1 time in total.
Posts: 4
Joined: Fri Jan 22, 2010 5:24 pm

Re: Firmware V1916 released 0106

Postby cobalt » Sat Feb 27, 2010 6:33 pm

ST-J wrote:
yozh wrote:I had an issue with 1916, after I applied the firmware it was very fast 220 but after 4 hours the drive crashed it would perform tests in lower 40s and would just drop out once in a while. I downgraded to 1571 and then back 1819 and now its in 220s again.

Whats up with 1916 ?

what system are you using with this SSD?

next time if it happens, try

The best way for the firmware update :
1. Back up the data.
2. Run Sanitary_Erase (data will be deleted after running ti).
3. Firmware update
4. OS installation.

The above 4 steps is the BEST way to get the drive clean and best performance.

When you skip the 2nd step, the performance degrade may happen.

Where can I download Sanitary_Erase??
Posts: 2
Joined: Tue Jan 26, 2010 11:01 am

Re: Firmware V1916 released 0106

Postby Malwolf » Fri Apr 09, 2010 2:26 am

Posts: 4
Joined: Sat May 23, 2009 8:47 am

Postby STT-MJ » Tue Apr 13, 2010 3:18 pm

Malwolf wrote:Here friend : http://www.sendspace.com/file/8rfcau ;)

Posts: 243
Joined: Tue May 19, 2009 2:15 pm

Postby kdiggz » Wed May 19, 2010 8:02 pm

finally got updated to 1916. my performance is junk. 129 write/133 read. what am i missing here? i have trim turned on. windows 7, core2duo, 4gb ram, 64gb ssd
Posts: 1
Joined: Mon Mar 15, 2010 1:54 pm

Postby t018681 » Fri May 21, 2010 5:47 am

is it with the new firmware upgrade tool still necessary to run sanitary erase separately as mentioned in the instructions above ?

Kind regards
Posts: 3
Joined: Tue Feb 02, 2010 8:16 am

Postby xcite » Sun Jun 06, 2010 12:41 am

@kdiggz this might be an issue with V1916, so try the new 1916w or downgrade to 1816.
Posts: 5
Joined: Wed Mar 03, 2010 8:56 am


Return to Firmware

Who is online

Users browsing this forum: No registered users and 3 guests