Firmware V1819-revised 10-19-09

[coke]

hi

are you sure??

can i reflash CH_FWUPT.iso (3066 KB) 10-19-09 with the FW1819_ISO.iso (3066 KB) 10-19-09 directly?

[blackcarghost]

Hello, i am a German User from Supertalent Products.
Sry but my English is not good.

I have a Problem to Install the Firmware Upgrade
My Computer say:

bad command or filename - "SSSDCHK.exe"
Remove CD - ROM from drive an reboot your computer.
C:\>

My Bios Configuration is IDE and first Boot device is CD-ROM
I don楹搕 know what楹搒 wrong.

Please can anybody help me?

[sascha h-k]

hast du es mit dieser .iso cd versucht ?

FW1819_ISO.iso (3066 KB) 10-19-09

[blackcarghost]

Ja genau mit dieser ISO

[ptr727]

The update fails when the machine has a floppy drive.
The update batch file refers to drive C: and to drive A:.

It should not make such assumptions.

I had to disable my floppy drive in order to get the update to work.

[blackcarghost]

@ptr727 Thanks but I havent a Floppy Drive and in the Bios Configuration is this Disabled

[blackcarghost]

@ptr727 THANKS!!!! I am a Idiot my USB-FlashStick was the Problem, I use it for ReadyBoost^^

[jroyal7]

After hours of work I finally got my drive converted back from v1711 to v1571. Now I go to use the ISO for V1819 when the ISO starts to boot it stops on me and says it can't read my CD ROM. My guess its because my CD ROM is a USB CD ROM. What do I do now? My computer is mini-ITX so there is no room for a CD ROM. Is there another way to install. IS there anyway to get the 1819b firmware to install from DOS? I have the FTM64GX25H model with DBX serial. Actually I have 6 of them so this is turning to one big blast. If the update to 1571 could be done in Win XP Part PE why can't they release a version that works the same way. Why this Linux firmware installer disk that craps out on me?

[khalis]

After hours of work I finally got my drive converted back from v1711 to v1571. Now I go to use the ISO for V1819 when the ISO starts to boot it stops on me and says it can't read my CD ROM. My guess its because my CD ROM is a USB CD ROM. What do I do now? My computer is mini-ITX so there is no room for a CD ROM. Is there another way to install. IS there anyway to get the 1819b firmware to install from DOS? I have the FTM64GX25H model with DBX serial. Actually I have 6 of them so this is turning to one big blast. If the update to 1571 could be done in Win XP Part PE why can't they release a version that works the same way. Why this Linux firmware installer disk that craps out on me?

Hi,
You must put the AHCI to desable and the SATA/IDE by default "LEGACY or enchanced" for up the fw.

[Ch4oS]

Hallo,
macht es 鐪塨erhaupt Sinn von der V1571 auf die V1819 upzudaten ? Benutze W7 Ultimate.

MfG
Ch4oS