Page 1 of 1

flashing FTM64GX25H

PostPosted: Mon Jan 14, 2013 10:37 pm
by masterofeurope

i'm trying to flash my STT_FTM64GX25H to firmware 2142.
My full serial is P607517-MIBY-115A054 and firmware 1916.

I'd set the SSD to factory settings and try the steps for MP Tool.
there I used flash MT29F32G08CBABA 64GB and K9LBG08UOM 64GB.

Both of these settings are not successful because my system don't find the SSD.
Can I use another file in DOS mode for example?


PostPosted: Tue Jan 15, 2013 9:13 am
by SSD-James
MT29F32xxxx is the right flash selection.
If your MP TOOL did not detect your SSD, it is because you did not set your SSD as Factory mode.
Please take a look at the document (pdf file) from the downloaded files.


PostPosted: Tue Jan 15, 2013 10:51 pm
by masterofeurope
Hi James,

my flashing was successful. I'd forgot to deactivate the user control setting in windows.
Thanks for your reply.

Kind regards,

PostPosted: Wed Jan 16, 2013 8:51 am
by SSD-James
Oh yeah. this is one of most common "no detection" error cause.
Thanks for your response,
Great day.