www.supertalent.com The Official Super Talent Support Forum

Login
FAQ MembersRegister

The firmware updater will not recognize my drive. HELP!

All firmware upgrade issues should go here

The firmware updater will not recognize my drive. HELP!

Postby dustinash » Fri Mar 23, 2012 11:05 am

Hello I have an ultra drive (sn# p588421-htbx-9299004) model is ftm28gx25h

I burned the CD firmware update disk and it will not recognize my drive.

This is very frustrating as I am doing an new os install and I need trim enabled on this drive. The lack of functioning firmware update software is stalling my work. Please attend to with proper program or instructions.

I am yusing firmware updater 2142 and I believe my firmware is 1517 currently

You can call me at 780-935-0377

my email is aaron@famousventures.com
dustinash
 
Posts: 1
Joined: Fri Mar 23, 2012 11:01 am

Postby SSD-James » Mon Mar 26, 2012 8:31 am

Please use MP TOOL from the following site.
viewtopic.php?f=74&t=10867
The 1st file is the one you need to download and run.

Thanks,
James
SSD-James
 
Posts: 2076
Joined: Fri Jul 16, 2010 12:41 pm

Postby Rydeen » Sun May 13, 2012 5:03 am

Hi, I have the same problem with MPTool. I recently used an old updater program (SupertalentFirmwareUpdate.exe) I still had on my other hard drive to upgrade the firmware. Unfortunately, a second after I started my computer froze and I had no choice but to turn it off. Now the drive shows as YATAPDON G BAREFOOT-R, and 128GB instead of 64GB.
I then downloaded MPTool and followed the instructions carefully, but the drive doesn't show once I press Refresh. How can I get my drive working again?
Rydeen
 
Posts: 1
Joined: Sun May 13, 2012 4:54 am

Postby SSD-James » Mon May 14, 2012 7:57 am

Rydeen,
Please check the switch status.
The setting should be at "Factory mode"

Thanks,
James
SSD-James
 
Posts: 2076
Joined: Fri Jul 16, 2010 12:41 pm


Return to Firmware

Who is online

Users browsing this forum: No registered users and 1 guest

cron