www.supertalent.com The Official Super Talent Support Forum

Login
FAQ MembersRegister

FTM64GX24 Germany...-MJBY-...

All firmware upgrade issues should go here

FTM64GX24 Germany...-MJBY-...

Postby Harry.Online79 » Wed Jan 18, 2012 9:29 am

Hi,
pls send me FLASH for Fw 2142 (SN P647462-MJBY-902A069).
Thanks in advance...
Harry
Harry.Online79
 
Posts: 1
Joined: Wed Jan 18, 2012 9:19 am

Postby SSD-James » Wed Jan 18, 2012 9:33 am

I think you did not read the release note carefully.
I mentioned "If you do not know the flash selection, you may choose 'Auto Detection'"
Anyway, your flash selection is MT29F32G08CBABA 64GB.
SSD-James
 
Posts: 2076
Joined: Fri Jul 16, 2010 12:41 pm

STT_FTM64GX25H

Postby dmcaisshit » Thu Mar 15, 2012 1:36 am

I've got two SSD and tried to flash the One with FW 1916 with the MP Tool. The Drive showed Up, but using the Button to Flash resultet in a FAIL Message.
System is Win 7 x64, Intel Q965/ICH8 chipset. I used the Auto Detect Feature.

STT_FTM64GX25H
641302.exe

FW 1916
P637541-MIBY-707A017

FW 2030
P658190-MJBY-B01A043
dmcaisshit
 
Posts: 2
Joined: Thu Mar 15, 2012 1:04 am

Postby SSD-James » Thu Mar 15, 2012 8:10 am

Please do the same thing with Manual flashing:
MT29F32G08CBABA 64GB.
SSD-James
 
Posts: 2076
Joined: Fri Jul 16, 2010 12:41 pm

STT_FTM64GX25H

Postby dmcaisshit » Thu Mar 15, 2012 2:47 pm

Thank You very much for your help.
Now that worked fine for the SSD with FW 1916.
May I use the same code MT29F32G08CBABA 64GB (64 MB) with the other drive with FW 2030 (P658190-MJBY-B01A043)?
dmcaisshit
 
Posts: 2
Joined: Thu Mar 15, 2012 1:04 am

Postby SSD-James » Thu Mar 15, 2012 3:14 pm

Yes, you need to use same selection.
Please re-flash both drives as soon as possible.
SSD-James
 
Posts: 2076
Joined: Fri Jul 16, 2010 12:41 pm

Postby jakespeed » Sun Jun 17, 2012 6:58 am

Hi,

OK fount post with this
model: FTM28GX25H serial: P664449-MJBY-C09A038 Your SSD flash Selection is MT29F64G08CFABA
and the with the selection of Flash it's running fine !
Autodedekt dosn't work.
Thanks'

my SSD is an
FTM28GX25H with Serial P654782-MJBY-A14A008
at the moment here is Firmware 2030 on the device.

I have a new Asrok Z77 Chipset Board AHCI ist enabled. The SSD is on the SATA 2 connectet.
The dirve was seen by the update tool but it schows firmware error...
Flash was autodedect but can you tell me the right Flash please... too

The WSSDChecker cant see the drive, the switch is on Factroy Setting when i try he update.
Tanx
Jake
jakespeed
 
Posts: 1
Joined: Sun Jun 17, 2012 6:41 am

Postby SSD-James » Mon Jun 18, 2012 3:23 pm

Dear jakespeed,
The current firmware is 2030 so that you need to update the firmware.
Download the MP tool and run with the selection of MT29F64G08CFABA 128GB.
I am not sure it will work on Z77 board or not. I haven't tried it.
Please make sure you will use SATA II port.

Thanks,
James
SSD-James
 
Posts: 2076
Joined: Fri Jul 16, 2010 12:41 pm


Return to Firmware

Who is online

Users browsing this forum: No registered users and 1 guest

cron